Building Higher Performance
Intelligent pump solutions enable high performance buildings In every high performing building there is a high performing pump. But pumps are only part of the story.
Intelligent solutions allow you to take control of your entire system to achieve an even higher performing building. With intelligent pumps and design, Grundfos is raising the bar to ensure exactly this. Intelligent control modes allow our pumps to automatically adjust to the most critical system demands.
This ensures optimal temperature, flow and pressure without compromise, giving you a pumping solution that increases the performance and efficiency of any application.
Cooling & Air-conditioning
- Improved chiller performance
- Maintaining design ∆T
- Reduce risk of bypass flows
- Multiple control modes
Hot water circulation
- Substantial energy savings
- Optimal temperature control
- Optimised to actual flow demands
Heating
- Optimal ∆P control, even without remote sensors
- Combination of control modes to control pressure, temperature and more
Water Pressure Boosting
- Low life-cycle costs
- Perfect pressure
- Reduced risk of pipe bursts
- Plug and pump solutions
Wastewater
- High efficiency even at high density
- Reduced downtime
- Plug and pump solutions
Fire Fighting
- Full-range solutions
- Global presence
- Minimal installation time solutions
Cooling & Air-conditioning
Pumps are at the heart of central air-conditioning systems and accurately controlled chilled water circulation is the key to user comfort and the efficiency of the entire system.
Our controllers and integrated frequency converters deliver system intelligence to maximise the efficiency of your commercial air-conditioning while minimising life-cycle costs.
MAGNA Series
Max flow : 138 m3/h
Head Max : 41 m
Liquid Temp : -25 to 120 deg
p max : 16 bar
UPS Series 200
Max flow : 63 m3/h
Head Max : 18 m
Liquid Temp : -10 to 120 deg
p max : 10 bar
TP Series (In-line Single Stage Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
CR series (In-line multi stage pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
NB Series (Endsuction close coupled Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
NK Series (Endsuction long coupled Pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
Install Grundfos MPC with the CU 352 multi-pump controller and experience how:
• Perfect cascade control removes the difficulties, caused by variation in consumption throughout the day, when deciding how many pumps to run and when to cut in/cut-out for an efficient operation
• Proportional pressure maintains a constant system pressure and overcomes the friction losses in pipes
Flow and Head details will be sufficient to chose the right pump? definitely not it's more than that, we are here to suggest the right pump & system
Water Pressure Boosting
Sustaining the best possible water pressure in commercial buildings can be a major challenge. Our commercial water booster pump systems provide you with a solution that ensures optimal water pressure where and when it is needed.
Our pump systems are optimised for the application, offering features such as proportional pressure functionality for friction loss compensation in large pipe grids, and soft pressure build-up functionality for installations with an unstable power supply.
Hydro MPC
Max flow : 1464 m3/h
Head Max : 161 m
Liquid Temp : 0 to 60 deg
p max : 16 bar
LS, LSV (Horizontal & vertical split case pump)
Max flow : 9503 m3/h
Head Max : 238 m
Liquid Temp : 0 to 100 deg
p max : 25 bar
NB Series (Endsuction close coupled Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
NK Series (Endsuction long coupled Pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
TP Series (In-line Single Stage Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
CR series (In-line multi stage pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
Install Grundfos MPC with the CU 352 multi-pump controller and experience how:
• Perfect cascade control removes the difficulties, caused by variation in consumption throughout the day, when deciding how many pumps to run and when to cut in/cut-out for an efficient operation
• Proportional pressure maintains a constant system pressure and overcomes the friction losses in pipes
Got no clue where to start? lets do this. Drop us a line, we will handle it
Simplifying wastewater
Wastewater installations in commercial buildings are often installed in basements and are typically complex to meet the vastly different requirements for wastewater transfer.
Grundfos wastewater products are highly specialised to meet the unique set of demands for commercial lift stations in buildings. At the same time, they share the intelligent design, high-quality materials and high efficiency.
SEG Sewage grinder pumps (0.9-4 KW)
Max flow : 10 lps
Head Max : 48 m
Liquid Temp : 0 to 40 deg
p max : 6 bar
SE/SL 9-30 KW
Max flow : 324 lps
Head Max : 78 m
Liquid Temp : 0 to 40 deg
p max : 8 bar
SL1/SLV 1.1 - 11 KW
Max flow : 83 lps
Head Max : 46 m
Liquid Temp : 0 to 40 deg
p max : 6 bar
Multi-lift (Pre-assembled package)
Max flow : 55 lps
Head Max : 46 m
Liquid Temp : 0 to 40 deg
p max : 10 bar
PUST (Pre-fabricated pumping station)
Sump Diameter : 1700 mm
Height : upto 6 m
Tank Material : GRP
LC 231 pump controllers are designed for level control, monitoring and protection of pumping systems, one or two pumps starting DOL up to 12 Amp.
The LC 231 has a built-in motor protection and current measurement.
LC 241 level controllers offer a comprehensive range of features for wastewater pumping systems, monitoring and control of one or two pumps, up to 72 Amp.
The LC 241 is a metal or plastic cabinet solution offering modularity and customization according to your needs.
A well designed sewage pumping system offers nearly 15-30% energy savings, Just send an enquiry, we will design it.
Hot water at the right temperature
Using Grundfos constant temperature hot water recirculating pumps, you get continuous and efficient hot water recirculation in the building with hot water at the right temperature from all taps.
This completely eliminates the issues in traditional systems, where constant speed pumps typically run at maximum speed and are throttled by a valve, resulting in high energy consumption.
TP Series (In-line Single Stage Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
CR series (In-line multi stage pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
MAGNA Series
Max flow : 138 m3/h
Head Max : 41 m
Liquid Temp : -25 to 120 deg
p max : 16 bar
UPS Series 200
Max flow : 63 m3/h
Head Max : 18 m
Liquid Temp : -10 to 120 deg
p max : 10 bar
NB Series (Endsuction close coupled Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
NK Series (Endsuction long coupled Pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
Install Grundfos MPC with the CU 352 multi-pump controller and experience how:
• Perfect cascade control removes the difficulties, caused by variation in consumption throughout the day, when deciding how many pumps to run and when to cut in/cut-out for an efficient operation
• Proportional pressure maintains a constant system pressure and overcomes the friction losses in pipes
Not getting hot water as soon as the tap is opened? you might need a system check...pls leave a text
we shall fix the system.
Plan your heating system from outside in
Solely relying on efficient pumps only gets you so far. But by taking the entire commercial heating system into consideration, you can move energy savings to the next level. Innovative controllers, integrated frequency converters and silent-running variable speed pumps all deliver the required system intelligence to maximise the efficiency of your commercial building heating system.
Mixit and upgrade
Grundfos MIXIT is an all-in-one mixing loop with flexible offerings and features designed to accommodate every need in both heating and cooling systems. MIXIT has a built-in actuator, controller and sensors, making designing, installing and operating mixing loops simple and easy
p max : 10 bar
Hydro MPC
Max flow : 1464 m3/h
Head Max : 161 m
Liquid Temp : 0 to 60 deg
p max : 16 bar
LS, LSV (Horizontal & vertical split case pump)
Max flow : 9503 m3/h
Head Max : 238 m
Liquid Temp : 0 to 100 deg
p max : 25 bar
NB Series (Endsuction close coupled Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
NK Series (Endsuction long coupled Pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
TP Series (In-line Single Stage Pumps)
Max flow : 494 m3/h
Head Max : 85 m
Liquid Temp : -40 to 150 deg
p max : 25 bar
CR series (In-line multi stage pumps)
Max flow : 203 m3/h
Head Max : 487 m
Liquid Temp : -40 to 150 deg
p max : 33 bar
Install Grundfos MPC with the CU 352 multi-pump controller and experience how:
• Perfect cascade control removes the difficulties, caused by variation in consumption throughout the day, when deciding how many pumps to run and when to cut in/cut-out for an efficient operation
• Proportional pressure maintains a constant system pressure and overcomes the friction losses in pipes
MAGNA Series
Max flow : 138 m3/h
Head Max : 41 m
Liquid Temp : -25 to 120 deg
p max : 16 bar
UPS Series 200
Max flow : 63 m3/h
Head Max : 18 m
Liquid Temp : -10 to 120 deg
p max : 10 bar